Publicité
GB
• When you turn the dial to [ON] and press [ ] but-
ton, the timer will shift to manual mode and
watering will begin immediately.
• In manual mode, when you press [ ] button
again, or turn the dial to any position
except [ON], then watering will stop immediately.
• In manual mode, if the rain delay time is set, the
timer will not display the rain delay time.
• Default manual watering time is 0 minutes, the
setting range is 0 to 240 minutes.
• [OFF]: When you turn the dial to [OFF], the timer
will turn off.
• Minimum working voltage is 2.4 V. When the bat-
tery is lower than 2.4 V, the low battery sign will
flash on the screen, and timer will stop working.
• To protect your timer from the weather ensure the
front panel of the timer is covered with the cover
provided once your timer is set.
Cleaning and maintenance
Cleaning
– Wipe the outside of the unit with a damp cloth.
Error/Fault
Display shows no information.
Irrigation cycle cannot be specified
on the unit
Irrigation cycle is not executed.
Battery is empty after a short period. The battery is weak?
Water pressure too low?
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
18
All manuals and user guides at all-guides.com
Cause
Battery has not been inserted prop-
erly?
The battery is weak?
Temperature at the display is too
high?
Is the wrong day/time set?
Programming incomplete?
Is the wrong day/time set?
Programme is switched off?
Is the filter blocked?
Tap has only been opened partially? Fully open the tap.
Hose is kinked or damaged?
Water distribution across too many
units?
– Regularly clean the filter sieve in the water hose
connection (10) using a brush.
Note: Before removing the unit from the
water tap, shut off the tap completely.
Storage
In the event of frost, disassemble the unit and acces-
sories, clean and store away from frost.
NOTICE! Risk of damage to the unit!
Frost will damage the unit and the accesso-
ries because they always contain water!
Troubleshooting
What to do when something doesn't work...
DANGER! Risk of injury! Unprofessional
repairs may mean that your unit will no
longer operate safely. This endangers you
and your environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedy
► Insert the battery – p. 17
Display appears after cooling down.
Enter the day/time again.
Programme the unit again.
Enter the day/time again.
Set the programme to [ON].
► Insert the battery – p. 17
Clean the filter sieve
Check the hose.
Reduce the number of units in use.
correctly. Information on returning these items is
available from the seller. Sellers are required to
accept these items free of charge.
Batteries and rechargeable batteries, which
are not permanently installed in waste elec-
trical devices, must be removed prior to dis-
posal and must be disposed of separately.
Lithium batteries and battery packs in all systems
must only be retuned to a collection point when dis-
charged. Batteries must always be protected against
short circuits by covering the poles with adhesive
tape.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Publicité
