Publicité
C
Fuel Gauge
For machines equipped with three fuel
tanks, this gauge indicates the fuel level in
each tank.
D
Interior Work
Turns the interior work light on or off.
Light
E
Glow Plug
Isuzu Engine - Light glows when glow plugs
(Isuzu Only)
are hot enough to start engine.
Heater Controls
The heater controls are located under the heater control
access door on the right side of the machine. Each heater
has its own controls.
Compare Figure 8 with the table following.
B
A
Figure 8
A
Heater LCD
Displays information on the heater. See
Display
LCD Display.
B
Heater Start
Starts the heater.
Button
LCD Display
The LCD display panel on the heater unit displays various
information regarding the heater unit and its performance.
Each heater unit has its own display. The display will illumi-
nate when the heater unit power switch is turned on.
Compare Figure 9 with the table following.
B
A
C
D
Figure 9
A
Barometer
Barometric pressure in millibars
B
Ambient
Actual (unheated) air temperature in
Temperature
degrees Fahrenheit
C
Damper Setting
Number damper should be set to for
maximum efficiency. See Damper
Control.
D
Heater Operating
- "START": Heater unit is off; press Heater
Status
Start Button to start heater unit
- "STOP": Heater unit is on; press Heater
Start Button to turn heater unit off
Heater Efficiency
Efficiency of heater unit in percentage
E
F
Target
Target temperature of heater outlet in
Temperature
degrees Fahrenheit
G
Outlet
Actual temperature of heater outlet in
Temperature
degrees Fahrenheit
H
Hourmeter
Total hours on heater unit
E
F
G
H
en
11
Publicité
