Publicité
Recording of Accompaniment Track
Press the [RECORD] button, LCD displays the symbol and the piano enters the status of recording waiting.Se-
lect the [Track 1]. The LCD displays the corresponding symbol,indicating this track enters the recording prepa-
ration. The Beat point displays as per current tempo while the indicator light shines. Press any key of keyboard
to begin to record.
Recording of Melody track
Press the [RECORD] button, LCD displays the symbol and the piano enters the status of recording waiting.
Select the [Track 2] - [Track 3]. The LCD displays the corresponding symbol,indicating this track enters the
recording preparation. The Beat point displays as per current tempo while the indicator light shines. Press any
key of keyboard to begin to record.
Recording of Melody and Accompaniment tracks simultaneously
Press the [RECORD] button, press melody track button [1] - [3] you want to record, after entered the status of
recording preparation. Then press any key of keyboard to begin to record.
Stop Recording
You can stop recording by pressing [START/STOP] or [RECORD] buttons. If you press [INTRO/ENDING] but-
ton during recording accompaniment track, a corresponding mode will play, and the recording will stop.
After the Recording was finished
When you press [PLAY/STOP] button, the recordbegins to play. You can play the recording that where re-
corded in three tracks simultaneously, press [PLAY/STOP] button once again to stop playing. Press [CLEAR]
button to clear all the recording that were recorded in tracks directly.
Saving Panel Setting
This instrument has the registry memory function that you can save your favorite setting and tune it out:
• Accompaniement Setting: style, chord, fill-in, metronome, accompaniment volume, tempo
• Voice setting: main voice, dual, keyboard split
• Effect setting: chorus, reverb, touch, style, volume
1. Set panel control (voice, accompaniment etc.) based on the requirement.
2. Press [BANK] button and select required music sound by +/- buttons.
3. When you press [STORE] button and not release it, then press any key of M1-M4 to save current panel
parameters in the memory of M1-M4.
28
Publicité
