Publicité
1. Assemble the square light brackets (16, 23) to the trailer beds (24, 28) with M10 x 70 (17) bolts and
nuts. The license plate holder (15) should be installed on the left-side light bracket (16) (Fig. 9-1).
2. Install the lights (19, 22) and complete the wiring.
3. Mount the clearance light (5) on the frame using the self-tapping screws (Fig. 9-2).
4. Plug light connector into the wire harness.
NOTE:
The driver's side light is the one with the clear lenses on the bottom, the license plate
bracket needs to be installed on the driver's side as well. Attach all necessary wiring and fasten
lights to the side of the trailer.
16
15
Fig. 9-1
14
MMT6X10 man
ASSEMBLY
ASSEMBLY
STEP 10
STEP 10
LIGHTING KIT INSTALLATION
Item N
o.
16
Left side light bracket
23
Right side light bracket
19
Left side rear light
22
Right side rear light
17
Hex M10 x 70 bolts & nuts (set)
5
Clearance light
15
License plate bracket
19
17
Description
SELF TAPPING SCREWS
Fig. 9-2
Qty.
1
1
1
1
4
2
1
5
Publicité
