Publicité
The wiring is pre-assembled under the frame, and must be connected to the harness that connects to
the front of the trailer drawbar (31).
Flip the trailer over with help and install the fenders.
WARNING:
Rolling the trailer over will require assistance. The trailer at this point weighs
approximately 583 lbs / 265 kg
1. Attach the fenders using M10 x 70 (17) bolts and the L-brackets (9) as shown (Fig. 7).
2. Use the M8 x 25 (14) bolts to connect the fenders between the front and rear L-brackets (9).
Fig. 7
12
MMT6X10 man
ASSEMBLY
ASSEMBLY
PRE-WIRING INSTALLATION
FLIPPING THE TRAILER
FENDER ASSEMBLY
Item N
Description
o.
17
Hex M10 x 70 bolts & nuts (set)
9
Fender bracket
14
Hex M8 x 25 bolts & nuts (set)
10
Fender
17
9
STEP 6
STEP 6
STEP 7
STEP 7
STEP 8
STEP 8
14
Qty.
4
4
8
1
10
Publicité
