Publicité
Remove the nut's equipment:
EN
1. Remove the nose and the counter-nose from the tie rod.
FR
2. Close up the grips.
4
3. Unscrew the set tie rod/setting spindle by turning the part
counterclockwise.
2
4. Unscrew the tie rod from the setting spindle by using part
of the wrench.
From nuts to rivets:
1
1. Screw the nose from your choice and tighten with part
of the wrench.
7
8
9
10
2. Put pieces
inside the tool in below order:
8
9
10
7
3
3. Finally screw the back part of the tool with part
of the wrench.
4 •
MULTI-100 - User Manual
Publicité
