Publicité
HOW TO CHANGE YOUR TOOL'S
EQUIPMENT
FROM RIVETS TO NUTS
From rivets to nuts:
1. Unscrew the nose for rivet with part
1
2. Unscrew the back part of the tool with part
you have inside.
3. Screw the tie rod on the setting spindle.
4. Put this set into the tool and tighten it by screwing part
5. Open the grips.
6. Put the nose and the counter-nose (respectively part
7. Adjust the tie rod's length to the nut's length by using the counter-nose. For a good setting,
the tie rod must exceed a little bit the nut's length.
1
of the provided wrench.
2
3
of the wrench and remove all pieces
4
5
5
6
3
.
4
6
and
) on the tie rod.
MULTI-100 - User Manual
EN
FR
• 3
Publicité
