Publicité
ASSEMBLY INSTRUCTIONS
Step 3
Screw the cylinder locking bolt (15) to the cylinder holder
assembly (13) as shown in the illustration.
Step 4
Make sure the cylinder locking bolt (15) on the cylinder holder
assembly (13) is on the same side as the door magnet (14),
and that the cylinder holder ring on the cylinder holder
assembly (13) is far away of the control panel.
Attach the cylinder holder assembly (13) to two strengthening
bars (11) with 4 M5x16 bolts (BB).
Fig. 3
13
15
Fig. 4
11
Hardware Used
BB
M5x16 Bolt
9
13
13
15
14
4 pcs
11
BB
Publicité
