Publicité
ASSEMBLY INSTRUCTIONS
Choose a soft and level location for the assembly. Remove all parts from the packaging, and check for missing parts.
If there are missing parts, please contact customer service.
Turn the assembled table top over, and then attach three
support legs A (9) and one support leg B (16) to the table
top panel (5) with 16 M6x20 bolt assemblies (AA).
Make sure the support leg B (16) with the door magnet(14)
is at the left of the control panel as shown in the illustration.
Half-tighten 16 M6x20 bolt assemblies (AA) on the table
top panel (5) during this procedure.
Attach two strengthening bars (11) to the four support legs
(9 and 16) with 4 M5x16 bolts (BB).
16
14
AA
M6x20 Bolt Assembly
BB
M5x16 Bolt
4 pcs
8
AA
9
16
3
5
16 pcs
11
9
9
16
9
9
9
9
BB
Publicité
