Publicité
ASSEMBLY INSTRUCTIONS
Step 5
Attach the right panel (8) to the 2 support legs (9 and 16) with
4 M6x20 bolt assemblies (AA).
Make sure the control panel on the control panel assembly (4)
fits the position on the right panel (8).
Do not fully tighten the hardware until the entire step is
completed.
Step 6
Attach the control panel assembly (4) to the right panel (8)
with 2 pcs M4x10 bolts (DD).
Attach the grounding wire to the control panel assembly (4)
and the right panel (8) with 1 pc M4x10 bolt (DD).
Connect the thermocouple to the valve and insert the
electrode wire into the igniter under the control panel tightly.
Fig. 5
Hardware Used
AA
M6x20 Bolt Assembly
Fig. 6
Thermocouple
Hardware Used
DD
M4x10 Bolt
10
AA
8
16
4 pcs
DD
Electrode
wire
Grounding
wire
4
8
3 pcs
9
8
Publicité
