Publicité
TROUBLESHOOTING
Problem
Receiver is powered
on but no alarms are
sounding
The receiver is getting
false alarms
The motion sensor is
missing alarms
There is no audible alarm •
The motion sensor will
not pair with the receiver
External alarms are not
working
SPECIFICATIONS
Input Voltage
Standby Current
Transmitting Current
Transmit Range (Open Air)
Sensitivity Selections
Battery Life
Dimensions
Weight
Input Voltage
Standby Current (with power LEDs on)
Working Current
Battery Life
Dimensions
Weight
AL101
•
Motion sensor is too far from the receiver
•
Motion sensor or receiver are located too close to large metal objects
•
Motion sensor and receiver are not paired
•
The zone that the motion sensor is paired to is turned off
•
Batteries on motion sensor are dead
•
Motion sensor may need to be repositioned
•
The motion sensor is too close to the area being monitored
•
The sensitivity of the motion sensor is set too high
•
There are large trees or objects moving into the area being monitored
•
Motion sensor may need to be repositioned
•
Motion sensor is too far away from area being monitored
•
The sensitivity of the motion sensor is too low
•
The batteries in the motion sensor are low
•
Motion sensor may need to be repositioned
Alarm on receiver is muted
•
Batteries in motion sensor are dead
•
The motion sensor is too far from the receiver to make a connection
•
Ensure that you have wired the external alarm properly, check the user
manual that came with your external alarm
Motion Sensor
4 AA Batteries (6V)
104 uA
17.5 mA
500 feet
(low) 15 feet / (high) 30 feet
More than 6 months
2.65" x 4.5" x 1.65" (without mount)
0.25 lbs (without batteries)
Receiver
9V Adapter or 4 AA Batteries (6V)
28 mA (batteries) / 36mA (adapter)
108 mA (with batteries) / 128 mA (with adapter)
Less than 24 hours (AC Adapter recommended)
4.3" x 2.75" x 1"
0.25 lbs (without batteries)
Possible Cause
10
Publicité
