Publicité
Requires
Place the loveseat frame (A) upside down on a soft, flat surface.
Connect the front legs (B) to the bottom of the loveseat frame (A) by
aligning the holes. Insert M6x20 combination bolt and washer (AA).
Lightly tighten bolts using hex key (BB). Do not completely tighten
until all assembly is completed. Repeat the same step for rear legs (C).
Do not
completely tighten.
Requires
Ensure all bolts are securely tightened using the hex key (BB). Turn the loveseat to the
upright position and place back cushions (D) and seat cushion (E) on the loveseat as
shown.
Your loveseat is now ready to use.
Publicité
