Publicité
Requires
Place the chair frame (A) upside down on a soft, flat surface. Connect
the front legs (B) to the bottom of the chair frame (A) by aligning the
holes. Insert M6x20 combination bolt and washer (AA). Lightly tighten
the bolts using the hex key (BB). Do not completely tighten until all
assembly is completed. Repeat the same step for rear legs (C).
Do not completely tighten.
Requires
Ensure all bolts are securely tightened using the hex key (BB). Turn the chair to the
upright position and place back cushion (D) and seat cushion (E) on the chair as shown.
Your chair is now ready to use.
Publicité
