Publicité
Requires
Place the table rim (A) on a soft, flat surface. Line up the bolt holes on
the table rim (A) with the corresponding bolt holes on the table leg
(B). Insert M6x20 combination bolt and washer (AA) and lightly
tighten the bolt using the hex key (BB). Do not completely tighten
until all assembly is completed. Repeat the above steps for the
remaining table legs.
Do not
completely tighten.
Requires
Ensure all bolts are securely tightened using the hex key (BB). Turn the table to the
upright position. Carefully place the glass (C) into the table rim (A).
Your table is now ready to use.
Publicité
