Publicité
Measurement
Air/Water oxymeter Initio
Ref :
211022
ENGLISH
All manuals and user guides at all-guides.com
4 Adjustment
The first regulation of the oxymetre is only made on the range of
measure 0-25 %, it is valid for the measure in the air and in the water.
4.1
Period of stoking
Wait until the 5 minutes heating
does not flash any more).
4.2
Calibration
The probe in the air, press the button of calibration.
CAL is displayed on screen for a few seconds and the red LED flashes.
Wait for some moments. In the stop of the blinking, your oxymètre is ready to
work, you are 20.9 %.
The oxymètre is so reglé to work in the air(sight) and in the water.
Should you want to use the oximeter in water immediately after the initial
adjustment, allow 5 to 8 minutes for the probe to stabilize in the liquid
medium.
5 Measurements
The calibration is stored for several days. Hence it is pointless to repeat this
operation each time the oximeter is used.
8
period
is over (the DEL of state of stoking
.
Publicité
