Troubleshooting; Before Calling For Service - Maytag MMV4205AA Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour MMV4205AA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting

BEFORE CALLING FOR SERVICE

Check the following list to be sure a service call is necessary. Reviewing additional information on items to check may prevent
an unneeded service call.
PROBLEM
If nothing on the oven operates
If the oven interior light does not work
If oven will not cook
If oven takes longer than normal to
cook or cooks too rapidly
If the time of day clock does not
always keep correct time
If food cooks unevenly
If food is undercooked
If food is overcooked
If arcing (sparks) occur
If the display shows a time counting
down but the oven is not cooking
Vent fan starts automatically
• check for a blown circuit fuse or a tripped main circuit breaker.
• check if oven is properly connected to electric circuit in house.
• check that controls are set properly.
• the light bulb is loose or defective.
• check that control panel was programmed correctly.
• check that door is firmly closed.
• check that Enter/Start pad was touched.
• check that timer wasn't started instead of a cook function.
• be sure the Power Level is programmed properly.
• check that the power cord is fully inserted into the outlet receptacle.
• be sure the oven is the only appliance on the electrical circuit.
• be sure food is evenly shaped.
• be sure food is completely defrosted before cooking.
• check placement of aluminum foil strips used to prevent overcooking.
• check recipe to be sure all directions (amount, time, and power levels) were
correctly followed.
• be sure microwave oven is on a separate circuit.
• be sure food is completely defrosted before cooking.
• check recipe to be sure all directions (amount, power level, time, size of dish)
were followed.
• be sure microwavable dishes were used.
• be sure wire twist ties were not used.
• be sure oven was not operated when empty.
• make sure metal rack (if used) is properly installed on 4 supports.
• check that door is firmly closed.
• check that timer was not started instead of a cooking function.
• if the temperature gets too hot around the microwave oven, the fan in the vent
hood will automatically turn on at the HIGH setting to cool the oven. It may
stay on up to an hour to cool the oven.
26
POSSIBLE CAUSES

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

8112p268-60

Table des Matières