Publicité
The ESC key allows to exit the current menu, and go back to the previous level. This means that,
wether in a branched menu, repeated clics on the key will be needed to get back, for exanple to
main menu.
A 2 S. pressure on the 'Esc' key when the keyboard is not used allows the activation of the cleaning
function. As the name suggests, this function disable the keypad functionality for front-cleaning
purposes.
During the keypad block due to the activation of the cleaning function, the following information will
EN
be displayed on the "
First line: "Keypad block"
•
Second line: the time for the cleaning will be marked by an increasing dot line, moving from left to
•
right. When the line will be filled up the ergo S (ergo M) will be ready to accept commands again.
Note:
to clean the device it is recommended to use a damp cloth and avoid alcohol and solvents.
The Enter key allows to enter the intended menu when browsing, to start editing during configuration
phase or to confirm the input of a data during an editing session.
In this regard, the following conduct:
• When broswsing the main menu, a pressure on the Enter key allows to enter the submenu and to
keep exploring in case the menu has several branches
• When visualizing the configuration data, a push on the Enter key permits the editing of the data
itself and this involves:
- the configured object flashes if it is slectable with a predefined set through the Scroll;
- the first character of a string flashes in case the string its being edited;
- the first number flashes when a numeric data or a phone number is being edited.
• During the editing phase, a further pressure on the ENTER key confirms the immission or modification
of the data (which will be sent to
permits to show: the following data, the subsequent menu or the data itself.
If "Enter" key is pushed when ergo is in standby mode, the display will show the installator's data
(Name, Number or email address) if they were set during the keypad configuration. In case the
installator's data were not available, the screen will display the two following default line:
<Installator>
<Information>
16
screen:
ergo"
gemino
ESC KEY
ENTER KEY
or
that will store it) and the
lares
ergo S (ergo M)
display
Publicité
