Publicité
The display shows all the information and the data
show up to 2 lines ,16 characters each, but ergo has an automatic scroll system to show 32 characters
rows.
Acting on keys "Left" or "Right" when leypad is idle, a sliding bar used for contrast adjustement will be
enabled. The ENTER key will store the new contrast value, the ESC key will leave value unchanged.
Values will change on a 3 seconds key holding.
The keypad is provided with an internal antenna that allows to detect any device that fits the RFID/
NFC 13,56MHz standard, simply by approaching it to the area shown in fig. ( 3-6 )
Note: The hardware includes a NFC Ready Transceiver: You may need to use a dedicated
application. (NOT INCLUDING)
It is conceived for data-entering (data/charachter) during the configuration process, PIN entering
(programmer or user) etc. By touching or exerting a slight pressure on the area corresponding to the
desired number, it allows to enter alphanumeric characters (letters and symbols) in addition to 0-9
numbers , depending on the
operating context (menu). This is possible because the keypad is provided with the tipical mobile
phone mode
technology, which allows to change the entered character depending on the settings (refer to the
following key-characters match chart).
Two ways to move forward the display line are possible while entering a text: using
another key or avoiding touching any key for 3 seconds after the last type.
Key-characters match chart:
KEY
FONT:
0 ( ) / % - _ # *
1 " " 'space' ? ! , . \ ' &
A B C a b c 2 $ @
D E F d e f 3 ; <
G H I g h i 4 = >
J K L j k l 5 [ ]
M N O m n o 6 { :
P Q R S p q r s 7
T U V t u v 8 + }
W X Y Z w x y z 9
DISPLAY
ergo S (ergo M)
CONTRAST ADJUSTMENT
RFID/NFC AREA
KEYPAD FUNCTION DESCRIPTION
KEYPAD
can manage. The display can
EN
15
Publicité
