Publicité
General safety advice
Guarantee
The function and safety of the equipment is only guaranteed if the
warning and safety instructions included in these operating instructions are adhered to.
Chamberlain GmbH is not liable for any personal injury or damage to property resulting from non-
observance of the warning and safety instructions.
Use for the intended purpose
The AS2 eco controls are intended exclusively for controlling door systems.
Target group
Only qualified and trained electricians may connect, programme and service
the controls.
Qualified and trained electricians fulfill the following requirements:
have knowledge of the general and specific safety and accident prevention regulations,
they have knowledge of the relevant electrical regulation,
they are trained in the use and care of appropriate safety equipment,
they are capable of recognising the dangers associated with electricity.
Instructions for installation and connection
The controls must be disconnected from the electricity supply before carrying out electrical works.
It must be ensured that the electricity supply remains disconnected for the
duration of the works.
Local protective regulations must be complied with.
Mains cables and control cables must be laid separately.
3
Publicité
