Publicité
© Panduit Corp. 2019
4. MAINTENANCE
The CTFP-100 must be
opened. Disconnect
compressed air!
4.1 ....... Cleaning
• Unscrew hexagon socket screw (1).
• Pull out the die set (2).
• Clean die set (3) and lightly oil pivot (4).
• Push in die set (5).
• Tighten hexagon socket screw (6).
4.2
Lubrication
• Unscrew the head (1).
• Remove the spring (2) and piston (3).
• Lubricate the two arms of the die set (4)
(e. g. CHEMPLEX 746).
• Insert piston and spring.
• Insert head (5) and fasten fingertight.
• Pay attention that the arms of the die set
(4) are correctly engaged in the piston
(3).
PA29444A01_02_ENG
OPERATING INSTRUCTIONS
Figure 4 - Cleaning
Figure 5 - Lubrication
Page: 6 of 8
CTFP-100
ENGLISH
3-2019
Publicité
