Manual Recording - Indexa DF210A Mode D'emploi

14.4 Launch the program
!
Click on the "i-SEC" Guarding icon on the dektop to launch the program.
14.5 Register the program
On the first time operation please register the program. The Name [43] and
Code [42] are printed on a sticker on the envelope of the CD.
If you do not yet wish to register, you can do this at a later time. The
unregistered version will limit the user to a trial operation of the program to one
hour.
!
Click on " egistry". R
!
Enter the Name and Code.
!
Click on " egistry". R
!
If you do not wish to register now click " lose".
The picture from the camera on channel 1 will appear automatically.
14.6 The graphic user interface
live display window
1 2 3
1 Signal indicator
Yellow: reception (1-4 bars)
Red: no reception
2 Mute alarm sound on motion detection
3 Main function icons
Set up for motion detection and schedule recording
Recording videos manually
Manual snapshot
View recording files
device, display and language
Information for registration
40 - GB
C
minimalise to bottom right symbol bar
minimalise to symbol bar
close program
camera selection
Note: Simultaneous images
in quad-format are not
available on PC-software
4
4 Zoom function
!
Click once on "+" to zoom in
!
Click on the direction cursors to move within the image
!
Click again on "-" to zoom out

14.7 Manual recording

!
Click .
Record and playback can be controlled by clicking the symbols:
Sart recording
Stop recording
Playback recorded file
Pause
Slow down playback speed
Increase playback speed
Stop playback
Store recorded video as new file
Delete recorded video
Recorded videos are compressed using XVID codec. For playback of the videos
using other programs, such as Windows Media Player, the XVID should be
installed (XVID decoder can be found on the installation CD).
14.8 Manual Snapshot
!
Click .
!
Click to take a manual snapshot.
The listed snapshots are in a temporary memory. These are
automatically deleted when the program is closed.