Publicité
19
T-6
Carefully cut the counter hole using
a Jig Saw
(T-6
). Carefully cut along
the inside of the drawn cut line.
22
Clean edge of counter top cutout
by Cloth (T-15) and Alcohol (T-16).
20
E-1
Prepare to install mounting clips
with screws (E-1/E-2).
23
T-10
T-16
T-15
Apply a bead of silicon 1/8"-1/4"
away from edge of counter cutout
and then align sink on counter.
E-2
x12
1 /8"
(3mm)
3 /8"
(6mm)
9
21
Slide Mounting Clips (E1 & E2) into
sink mounting rails. Center Clips
along each side of the sink, 2 Clips
on the 22" sides and 4 Clips on
the 33" sides as shown.
24
Center sink within counter opening.
Apply even pressure to all sides.
Publicité
