Publicité
13
D-1
D-2
D-3
D-4
D-5
Prepare strainer for installation.
Loosen the Lock Nut, check to
ensure that all parts are complete.
16
T-11
Wipe any excess Plumber's Putty
away from top of the sink hole.
Place the Bottom Seal (D-4) on the
underside of the Strainer Bowl (D-2)
and tighten with Strainer Nut (D-5)
using Channel Lock Wrench (T-11).
14
Apply a 1/4" bead of Plumber's
Putty (T-13) around the sink drain
hole as shown above.
Repeat for both sink holes.
17
T-5
Place Top-mount Template (B-3) on
counter, cut along top-mount
installation line. Trace outside line
installation (as shown on template).
8
15
Set the Strainer Bowl (D-2) and Top
Seal (D-3) into the hole from above
and push down firmly.
18
B-3
T-7
Drill pilot holes (1/2" bit) on cut line.
Warning: Safety Glasses
recommended (T-12).
D-2
D-3
D-2
D-3
D-4
D-5
D-4
D-5
Publicité
