Publicité
7
C
D
A-5
Thread and tighten Hose Protector
(A-5) onto bottom of Faucet (A-1).
10
C-3
C-5
C-5
C-6
Slide 1 Rubber Gasket (C-5) onto
the bottom of the Threaded Shank
(C-4). Insert Threaded Shank
through Soap Dispenser sink hole.
8
A
1
2
3
Connect Faucet (A-1) Spray Hose
A to Quick Connect Adaptor B.
11
C-6
Secure Threaded Shank (C-4) by
sliding 1 Rubber Gasket (C-5)
onto bottom of Threaded Shank
(C-4) and tighten Tightening Nut
(C-6).
7
9
B
A-7
Tighten weight (A-7) to spray hose
(A-9) with 2 screws provided. Measure
15 inches down from the underside
of the faucet on the spray hose. Pull
the faucet out of the spout to test
the distance and the retracting action.
Move the weight if necessary.
Be careful not to put weight so far
down on the hose that it rests on
the floor of the cabinet, or the spray
head won't retract all the way.
12
C-3
From under the sink, thread and
tighten the Bottle (C-3) onto
Threaded Shank (C-4)
T-4
Publicité
