Publicité
Step 8
On the Right Side Panel (C) install the
General Slide-Right (18) in the position
shown on the drawing. Using a Phillips
Screw Driver, secure into place with 4
each 4X10 Screw (10).
On the Right Side Panel (C) install the
Full Extension Slide (16) in the position
shown on the drawing. Secure in place
with 3 each 4X10 Screw (10).
Step 9
With the Back Panel (D) laying on a non-
abrasive surface, install the Right Side
Panel (C) so that the 3 each Cam Screws
on the Right Side Panel (C) engage with
the Cam Locks located on the Back Panel
(D). The Fixed Shelf Panel (F) should
be facing the bottom as the Adjustable
Foot (14) are on the Right Side Panel (C).
Additionally, the 2 Cam Locks located
on the Fixed Shelf Panel (F) will engage
with the Cam Screws located on the Right
Side Panel (C). Finally make sure that the
Wood Dowel (6) fit securely into holes
located on the Right Side Panel (C).
Attach the Left Side Panel (B) to the Back
Panel (D) so that the Cam Screws (1) on
the Left Side Panel (B) engage with Cam
Locks (2) located on the Back Panel (D).
Using a Phillips Screw Driver rotate the
cam locks 1/2 turn clockwise until snug.
BOTH LEFT AND RIGHT PANEL
LEGS SHOULD HAVE THE
ADJUSTABLE FOOT FACING THE
SAME WAY.
LLR44311_F.indd 7
LLR44311_F.indd 7
All manuals and user guides at all-guides.com
Page 7 of 27
3/4/11 12:51 PM
3/4/11 12:51 PM
Publicité
