Publicité
All manuals and user guides at all-guides.com
Operation
You can also power on & off by pressing the power button
for about 2 seconds. If no audio signal is detected for 1 hour,
power is automatically off.
Turn on the radio and find a frequency that is not being used
for broadcasting. Match the frequency of MusicFly Pro on
your radio using up/down button.
Select a frequency which sounds clear, makes less
background noise than other radio station.
Connect portable audio device(MP3P, CDP, PMP, PDA,
navigation or mobile phone etc.) to MusicFly Pro with stereo
cable.
Turn on the audio device and press the play button.
Set the volume to a reasonable level to get the best signal
quality. Set the volume of the audio device to medium level
and control the delicate volume using radio volume.
When you use MusicFly Pro with portable memory device
(USB storage, memory card or portable hard disk) can you
listen to sound files like MP3, WMA in USB storage, through
any FM radio.
Automatically power is on once you put MusicFly Pro into the
car cigarette lighter power adapter.
You can also power on & off pressing the power button for
about 2 seconds. If no audio signal is detected for 1 hour,
power is automatically off.
Turn on the radio and find a frequency that is not being used
for broadcasting. Match the frequency of MusicFly Pro on
your radio using up/down button.
Select a frequency which sounds clear, make background
noise less than other radio station.
Plug USB storage into the USB port at the bottom of MusicFly,
then MP3 or WMA files are played automatically stored in the
USB storage.
Support only MP3 and WMA file, the other file types and the
files locked by DRM are not played.
Using memory card(SD, MMC, CF or Memory stick)
- 19 -
MFlyproDEFN-new.indd 19
15.11.2010 13:18:58
Publicité
