Publicité
All manuals and user guides at all-guides.com
MFlyproDEFN-new.indd 16
Description & Functions
Getting started
Put the MusicFly pro into the 12V power the cars. Set the
device so that it is convenient to use. The display turns on
instantly. The unit is operational. The MusicFly Pro checks
whether a device is connected to the USB port and goes into
the pause mode
Turn on from Standby-Mode
Hold down the power button for about 2 seconds to turn it on.
The MusicFly Pro checks whether a device is connected to the
USB port. Start playing with the Play / Pause button
Turn off
Hold down the power button until the device is off.
Standby-Mode
If no audio device is connected to the USB port or an audio
input is not connected or pause is pressed, the device turns
off the transmission after about 1 minute. In the radio a noise
is heard.
If a audio signal is connected within the next 60minutes the
MusicFly Pro turns on automatically. Otherwise it is necessary
to press the ON/OFF button to turn it on.
Setting the frequency
Press MENU/RPT button.
Select the frequency with
Press MENU/RPT button again.
Playback
Press
button to start playback or pause.
When the music is playing, press briefly
move to the next or previous title.
Press and hold the
move to the next or previous directory.
When the playback is started, the display shows the remai-
ning time, the frequency or the equalizer depending on the
display mode.
.
/
buttons.
/
buttons for about 2 seconds to
- 16 -
/
buttons, to
15.11.2010 13:18:57
Publicité
