Publicité
EN
This auger shaft measures 7/8" in diameter. It will work
with most universal sized bits designed for this size of
shaft.
1. Make sure you are using the correct bit (7) for the
material you want to drill into.
2. Align the holes in the auger shaft (9) with the holes
in the bit.
3. Open the ring pin (6).
4. Insert the ring pin through the holes.
5. Close and lock the ring pin to secure the bit to the
auger shaft.
English
9
7
8.1.2 ATTACH THE EXTENDER
7
6
1. Align the holes in the auger shaft (9) with the holes
2. Open the ring pin (6).
3. Insert the ring pin through the holes.
8
10
in the extender (10).
9
6
Publicité
