Télécharger Imprimer la page

GreenWorks Pro EA80L00 Manuel D'opérateur page 11

Publicité

3. Check that there are no loose or damaged
components. If it is necessary, replace the damaged
components, tighten screws and bolts, or speak to a
person of an approved service center.
4. Store the machine in a cool and dry location.
12
TROUBLESHOOTING
Problem
Possible cause
The battery pack
The motor does
is not installed
not start when
tightly.
you pull the trig-
ger.
The battery pack
is out of power.
The machine
The machine
smokes during
has damage.
operation.
The machine
has damage.
The motor is on,
the bit do not
move.
The bit is
blocked.
The parts are
loose.
There is too
much noise
and/or vibration
during operation.
The parts have
damage.
13
TECHNICAL DATA
Voltage
No load speed
Bit
English
Solution
Make sure that
you tighlty install
the battery pack
in the machine.
Charge the bat-
tery pack.
1. Immediately
stop the ma-
chine.
2. Remove the
battery pack.
3. Contact the
service cen-
ter.
Do not use the
machine and
contact the serv-
ice center.
Remove battery
pack then clear
blockage from
the bit.
1. Stop the ma-
chine.
2. Remove the
battery.
3. Inspect for
damage.
4. Check and
tighten loose
parts.
Do not use the
machine and
contact the serv-
ice center.
80 V
-1
Forward: 210 min
-1
Reverse: 50 min
Diameter: 8'' (200 mm)
Length: 35'' (890 mm)
Torque
Weight (without battery
pack)
Battery model
Charger model
The recommended ambient temperature range:
Item
Appliance storage temper-
ature range
Appliance operation tem-
perature range
Battery charging tempera-
ture range
Charger operation temper-
ature range
Battery storage tempera-
ture range
Battery discharging tem-
perature range
14
LIMITED WARRANTY
BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period
of four (4) years against defects in materials, parts or
workmanship. Greenworks, at its own discretion will
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been hired or
rented for industrial/commercial use, and that have
been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
11
59 ft-lbs
33.5 lbs (15.2 kg)
BAB727, BAB729 and
other BAB series
2901402, CAB801 and
other CAB series
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
GARANTIE OUTIL &
EN

Publicité

loading

Produits Connexes pour GreenWorks Pro EA80L00

Ce manuel est également adapté pour:

Eab401