Publicité
Error 7 (RELAY CLOSED)
This message indicates a problem with the heating control circuit. Contact a qualified technician.
Error 8 (SENSOR DEFECT)
This message indicates a problem with the temperature sensors in the heater or in the shell. The sensor
could be disconnected or damaged. Try to reinitialise the spa (see next page). If the problem persists
contact a qualified technician.
Error 9 (CLOCK ERROR)
This message is displayed if there is a problem with the clock in the SP 800. Try to reinitialise the spa
(see next page). If the problem persists contact a qualified technician.
Alert 1 (SENSOR ERROR)
This alert means that one of the two digital temperature sensors, located in the heater or in the spa, is
not functioning correctly. The spa will continue to operate using the other sensor. However, there is a
problem, call a qualified technician.
Cutting and reconnecting the electricity supply will not reinitialise the system.
Reinitialisation
Press the following 4 keys simultaneously:
•
Underwater light intensity
•
Light effects
•
Two speed pump operating mode
•
Variable speed blower
SPAS
2020/10 - Indice de révision : D - Code : 38050
47/48
Publicité
