Publicité
Nota bene :
If the "underwater light effect setting" key is pressed while the underwater lights are off, the lights will
come on at maximum intensity.
By default, the control pad lighting will match the underwater light settings (intensity and effect), however
this function may be deactivated.
List of available colours:
•
marine blue
•
cyan
•
sky blue
•
dark blue
•
purple
4.1.1.7
"Variable speed blower" key
If your spa is equipped with a blower, this key may be used to select the blower operating speed.
From the default screen, press this key once, the current blower operating mode (one of 4 possible settings)
is displayed for 5 seconds.
While this value is displayed, press this key again to modify the blower operation mode.
5 seconds after the "blower" key was pressed for the last time, the screen returns to the default display and
this value is saved to memory.
The on-screen cycle through the blower operation modes is as follows :
"blower high": the blower works at maximum capacity; the LED turns red
"blower variable": The blower speed follows an alternating cycle; the
LED turns green
"blower speed": there are 9 possible blower speeds (11% - 22%
- 33% - 44% - 55% - 66% - 77% - 88% - 100%); the LED turns
orange.
While "blower speed" is displayed, press the arrow keys to
modify this value: the first time the key is pressed, the current
value is displayed, press again to modify this setting.
"Blower OFF": the blower is off; the LED is out
Nota Bene :
While the blower is in "high" or "variable" mode, pressing the UP or DOWN key will switch to "blower
speed" mode.
SPAS
•
magenta
•
pink
•
red
•
orange
•
yellow
1 press
1 press
1 press
•
citrus green
•
green
•
white
Down
A
A
O
O
A
A
O
O
3
3
3
3
2020/10 - Indice de révision : D - Code : 38050
Up
Z
Z
Z
Z
Z
Z
Z
Z
35/48
Publicité
