Télécharger Imprimer la page

Seg MICHIGAN 81cm Mode D'emploi page 48

Publicité

Michigan 8cm LED BLU-TV
Connecting a DVD player
Connect a DVD player using either a SCART cable or the
HDMI cable. (only if your external equipment supports
HDMI).
(All illustrated cables are not supplied)
When using the SCART cable
• Switch on the TV
• Switch on the DVD player
• Select SCART as input source
When using the HDMI cable
• Select HDMI as input source
HDMI Connection
TV Back
HDMI Cable
DVD or VCR Back
DVD or VCR
HDMI connection allows the user to transfer all audio/video/control signals through one cable only. These signals are
transferred in digital.
USB Connection
Put the USB flash drive in to the USB port, Select the USB channel source using the SOURCE button on the remote
control. The maximum supported capacity of external storage devices (e.g. USB memory stick or USB hard disk) is
1TB. However, not all available storage media may be compatible.
USB Port
All manuals and user guides at all-guides.com
HDMI to HDMI
SCART
TV Back
SCART Connection
DVD or VCR Back
DVD or VCR
Connect the SCART connector to the external video item
and the SCART connector on the TV. The SCART lead
operates as an Input/Output connection. If the tv does not
select the SCART input automatically, press the SOURCE
button on the remote control and select the SCART signal
source.
HDMI Cable
DVD or VCR Back
DVD or VCR
USB Port
Scart cable
3

Publicité

loading