Publicité
9308743
20 lb Pressure Abrasive Blaster
V1.0
AIR SUPPLY
CAUTION! An oiler system should not be used with this
tool. The oil will mix with the abrasive material being
propelled and cause poor results.
WARNING! Do not install a female quick coupler on this
tool. This will allow the tool to retain pressure and
operate accidentally after air supply is disconnected.
ABRASIVE
CAUTION! Check to ensure abrasives are dry and clean
so that they do not clog the unit.
CAUTION! Do not overfill the tank with too much
abrasive.
OPERATION
CAUTION! Both the abrasive valve and trigger valve
should be either fully opened or fully closed at all times.
CAUTION! Do not attempt to regulate air or abrasive
discharge rate with the trigger valve. This will damage
the valve.
CAUTION! When operating, always position the
compressor upwind of the blaster. This will keep it safe
from abrasive or dust.
12
For technical questions call 1-800-665-8685
Publicité
