Publicité
InstallatIon
Installation
4. Installation
Material losses
note the maximum load bearing capacity of the sup-
port (see chapter "specification / Data table").
Material losses
!
the t-support may bend if the heat pump is subject
to any lateral load.
f Do not exert any pressure on the sides of the heat
f
pump.
f Mark out the holes on the strip foundation.
f
f Drill the holes.
f
f anchor the t-support to the strip foundation with suitable
f
fixing materials. the fixing materials are not included in
the standard delivery.
f secure the t-support to the underside of the heat pump
f
using the screws and washers provided.
sK 2
All manuals and user guides at all-guides.com
5. Specification
5.1
Data table
Height
Width
Weight
Weight loading
SK 2
236693
mm
105
mm
467
kg
6.5
kg
91
| 5
Publicité
