Publicité
troubleshooting
Problem
Burner will not light with match
QUESTIONS?
Just call 800.762.1142 for parts and service. For faster service, have the article number ready when when calling.
Possible Cause
LP gas tank valve is closed
No gas flow
LP gas tank is low or empty
LP gas leak
Coupling nut and regulator not fully
connected
Obstruction of gas flow
Disengagement of burner to valve
Spider webs or insect nest in burner/
venturi tube
Burner ports clogged or blocked
Prevention/Cure
Make sure regulator is securely attached to the LP gas
tank per "Installing LP Gas Tank" section, then turn LP
gas tank valve to "OPEN"
Check if LP gas tank is empty
A. If empty exchange, refill or replace
B. If LP gas tank is not empty, refer to "Sudden drop
in gas flow or reduced flame height"
Exchange, refill or replace LP gas tank
1. Turn LP gas tank valve to "CLOSED"
2. Wait 5 minutes for gas to clear
3. Follow "Checking for Leaks" section
Turn the coupling nut about one-half to three-quarter
additional turn until solid stop. Tighten by hand only -
do NOT use tools.
1. Clear burner/venturi tube
2. Check for bent or kinked hose
Re-engage burner and valve
Clean burner/venturi tube
Clean burner ports
27
Publicité
