Publicité
step 1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.800.762.1142 toll-free. Please have your owner's manual and DPCI number available for reference.
Note: The model number is printed on a label which can be found on the inside door, back or side of the base assembly.
Assembly Tips:
1. Select an area where you will assemble this product. To protect components, choose a smooth non abrasive surface that's free of cracks
or openings.
2. Spread out all parts.
3. Tighten all hardware connections by hand first. Then, before completing each step, go back and fully tighten all hardware. Be careful not
to over-tighten. That could damage surfaces or strip threads.
4. For best results, complete each step in the order presented.
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the solution are included in the "Operating Instructions" section of this manual).
• (1) Precision-filled LP gas grill tank with Acme Type 1 external threaded valve connection (standard grill size).
Typical assembly is approximately 45 minutes.
QUESTIONS?
Just call 800.762.1142 for parts and service. For faster service, have the article number ready when when calling.
13
Publicité
