Publicité
Pre-Installation
Positioning the Refrigerator
• Keep away from direct sunlight and heat producing appliances, such as cook tops, ovens, and
dishwashers.
Power Supply
•
The power plug must be easily accessible when the refrigerator is installed.
The power plug should be inserted into a special socket to avoid the refrigerator to unexpectedly
•
power off.
•
Do not use extension cord or porous adapter.
To understand the requirement for power supply please refer to the nameplate in left side of the
•
refrigerator.
•
The refrigerator must be grounded correctly.
Energy Saving Tips
When Installation
• Install the refrigerator in the area with the lowest indoor temperature, keep it away from direct
sunlight,heating pipes, ventilation adjustment devices and other appliances that radiate heat.
• Make sure the refrigerator is in a well ventilated area.
When in Use
• Do not fill the refrigerator with food, as this could cause poor air circulation.
• Do not cover the shelves with anything such as; aluminum foil, waxed paper or tissue paper.
Before Placing Food in the Refrigerator
• Remove all packaging materials inside the unit and on the outside of the unit.
• Clean the cabinet with a cloth and warm water mixed with dish detergent to clean off the dust
gathered on the unit during manufacturing and during transportation.
• There will be an odor when the refrigerator is first used. The odor should disappear after the
temperature inside the unit stabilizes and lowers.
• Have the unit operate for 2-3 hours without any food inside it, so that each compartment
reaches its optimal temperature.
EN - 5
Publicité
