Publicité
Pre-Installation
Before Installing Refrigerator
Remove all the packaging.
1
Including the foam base and any tape attached to the accessories. Do not
remove any warning labels.
Ensure all the correct accessories are included with your refrigerator.
2
Contact seller if the items are incomplete or damaged.
Choose a proper location for the refrigerator.
3
See page 7 for further instructions.
4
Clean the refrigerator thoroughly.
See page 12 for further instructions.
Allow the appliance to sit before plugging it in.
5
Wait at least 2 hours before connecting.
6
Remove the protection film.
In order to save energy and ensure the dissipation of heat.
Tips on First Time Use
Connecting the
power supply
It will take several hours for
the refrigerator to reach
default temperature setting.
The default temperature
setting for the refrigerator
compartment is 41°F (5°C).
The default temperature
setting for the freezer
compartment is -0.4°F
(-18°C).
Note: After adjusting the temperature setting, it will take time before the cabinet temperature reaches stability. The time
will vary depending on ambient temperature, frequency of opening refrigerator doors and the food stored in refrigerator.
1
Storing food
Food can be put into
refrigerator 2- 3 hours after
connecting to power supply.
Do not overstock the
refrigerator compartment.
Each shelf holds up to 53lbs
(24kg).
EN - 4
2
Adjusting the
temperature
After the refrigerator is
stocked.
Allow it to run for 24 hours
before adjusting the
temperature.
3
Publicité
