Publicité
Removing the Battery Pack
1.
Place the chain saw on a flat surface.
2.
Press down on the latch and remove the battery
pack from the cavity.
Figure 22
1. Latch
Charging the Battery Pack
Important:
Make sure to read all safety
precautions.
Important:
Charge the battery pack only in
temperatures that are within the appropriate
range; refer to
Specifications (page
Note:
At any time, press the battery-charge-indicator
button on the battery pack to display the current
charge (LED indicators).
1.
Plug the power cord that matches your power
outlets into the battery charger.
2.
Make sure that the vents on the battery pack are
clear of any dust and debris.
3.
Line up the cavity in the battery pack
with the tongue on the charger.
All manuals and user guides at all-guides.com
g192109
8).
(Figure
23)
15
Figure 23
1. Battery pack cavity
2. Battery pack terminals
3. Battery pack venting areas
4.
Make sure that the vents on the battery charger
are clear of any dust and debris.
5.
Slide the battery pack into the charger until it is
fully seated
(Figure
Figure 24
1. Charger venting areas
2. Left indicator light
6.
To remove the battery pack, slide the battery
backward out of the charger.
4. Battery-charge-indicator
button
5. LED indicators (current
charge)
24).
3. Right indicator light
g192748
g194423
Publicité
