Publicité
8
www.raider.bg
EN
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric and pneumatic
tools - RAIDER. When properly installed and operating, RAIDER are safe and reliable machines and work
with them will deliver a real pleasure. For your convenience has been built and excellent service network of
45 service station across the country.
Before using this machine, please carefully acquainted with these "instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully, including
the recommendations and warnings in them. To avoid unnecessary errors and accidents, it is important that
these instructions will remain available for future reference to all who will use the machine. If you sell it to a
new owner "Instructions for Use" must be submitted along with it to enable new users to become familiar with
relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the
trademark RAIDER.
Address: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel +359 700 44 155, www.raider.bg;
www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope
of certification: Trade, import, export and servicing of hobby and professional electrical, mechanical and
pneumatic tools and general hardware. The certificate was issued by Moody International Certification Ltd,
England.
parameter
Model
Max. Pressure:
Bracket length:
Work Pressure:
Nozzle:
1. Always wear safety goggles or glasses.
2. Always ensure machine is switched off before connecting to air supply.
3. Disconnect any machine from the air supply before changing blades or discs, and before servicing any
type of machine.
4. Always keep your air tool clean and lubricated. Daily lubrication is essential to avoid internal corrosion
and possible failure.
5. Do not wear watches, rings bracelets or loose clothing when using air tools.
6. Using only light weight coil hoses from a tool to the wall or compressor coupling. Do not fit quick change
couplings onto the machine as vibration can cause the coupling to fail.
7. Do not overload the machine. Allow the tool to operate at its optimum speed for maximum efficiency.
8. Do not increase the air pressure above the manufacturers recommended level, as excessive overload
can cause the machine casing to split. Also this creates excessive wear on moving parts and possible failure.
9. In the interests of safety and possible damage to the machine/operator, always ensure that the machine
has stopped before putting it down after use.
10. Always ensure that the work piece is firmly secured leaving both hands free to control the machine.
11. Always ensure that the accessories such as blades, discs, sockets, etc. are rated/designed for use
with the machine. Also correctly and securely fastened before connecting the machine to the air supply.
All manuals and user guides at all-guides.com
ORIGINAL INSTRUCTION MANUAL
TECHNICAL DATA
Important Safety Rules
unit
value
-
RD-AS03
bar
8.3
mm
4-16
bar
4-7
inch
1/4"
Publicité
