Publicité
Drainage
Drainage by water tank
While the water tank is full, the compressor will stop for self-protection and the water full indicator will
turn into red. To move the water tank, pull it out squarely from the unit by using the handle at the water
tank.
After empting the water tank, place the water tank into space. Make sure it is properly positioned, in
order for the 'water full' sign to go out and your dehumidifier is operating.
Please note:
Do not move & destroy the float of water tank, the machine will not able to operate.
•
In case the water tank has not been positioned well, the water full indicator will turn into red.
•
Continuous drainage
To set the unit up for continuous drainage with the following procedures :
1. Keep the water tank inside the unit.
2. Connect the water spout of the water tank
with a water tube of inner diameter 11 mm.
* Please note, this water tube is not supplied
along with the unit.
3. Ensure the water will always drain away
freely and the tube will remain in right place.
Note! In very cold weather conditions,
precautions should be taken to prevent the
water tube from freeing.
26
ENG
USER MANUAL
Réf. DM 30.2 5.12/2024 U
Publicité
