USER MANUAL
ENG
ONLY A LICENSED PROFESSIONAL IS ALLOWED TO DISMANTLE OR MODIFY
THE APPLIANCE.
THE MACHINE IS TO BE USED ONLY FOR ITS PRESCRIBED PURPOSE. ANY
OTHER USE IS DEEMED TO BE A CASE OF MISUSE. THE USER/OPERATOR, NOT
THE MANUFACTUER WILL BE LIABLE FOR ANY DAMAGE OR INJURIES OF ANY
KIND CAUSED AS A RESULT OF THIS.
Safety relating to refrigerant R290:
Read these warnings carefully.
This appliance contains the refrigerant R290. R290 is a refrigerant that
complies with the relevant European Directives. Never perforate the
refrigerant circuit. R290 is flammable (GWP3)!
Do not use means to accelerate the defrosting process or to clean, other than
those recommended by the manufacturer.
The appliance shall be stored in a room without continuously operating
ignition sources (for example: open flames, an operating gas appliance or an
operating electric heater).
Do not pierce or burn any of the components of the cooling circuit of the unit.
Do not set light to the unit.
The appliance shall be stored so as to prevent mechanical damage from
occurring.
Appliance should be installed, operated and stored in a room with a floor
area larger than 4m2.
Be aware that the refrigerants may not contain an odour, which means you
cannot smell leaks..
Compliance with national gas regulations shall be observed.
Keep ventilation openings clear of obstruction.
A warning that the appliance shall be stored in a well-ventilated area where
the room size corresponds to the room area as specified for operation.
Any person who is involved with working on or breaking into a refrigerant
circuit should hold a current valid certificate from an industry-accredited
assessment authority, which authorizes their competence to handle
refrigerants safely in accordance with an industry recognized assessment
specification.
Servicing shall only be performed on the grounds as recommended by the
equipment manufacturer. Maintenance and repair requiring the assistance
20
Réf. DM 30.2 5.12/2024 U