Removing Upper Hose Blockages; Removing Brush Roll Obstructions; Remove Blockage - Rubbermaid PH12 Manuel Du Propriétaire

Removing Nozzle Hose Blockages
5
1
To reinsert nozzle hose, place the rib on the lower hose collar
in the lower right corner of the upper opening. Push hose fully
into nozzle.
7
2
3
Stand unit upright. While reinserting upper collar of nozzle hose
into opening on bottom of upper structure, push latch to right to
ensure secure connection.

Removing Upper Hose Blockages

1
B
4
2
Remove upper hose by squeezing hose clip/pressing wand
release button. Remove blockage.
(cont.)
6
1
Guide channel in lower hose collar onto post, and rotate to
lock into place. Close inspection door, snapping it into place.
2
B
Reinsert upper hose into openings on upper structure/wand.
Push hose into openings until it snaps into place.
18
Removing Upper Hose Blockages
3
Hang upper hose onto hose hook.

Removing Brush Roll Obstructions

1
4
G
2
3
Remove brush roll from unit. Remove obstruction from brush
roll or nozzle opening.
3
2
While pressing in brush roll release button, place brush roll
cover onto unit and snap into place.
(cont.)
2
1
2
To reinsert brush roll, locate end of brush roll with recessed
shaft. Insert this end of brush roll into nozzle opening first.
Turn counter-clockwise to fully seat brush roll.
19
ENGLISH