Icematic And Ice Storage Container; Using The Icematic - Blomberg BRFD2230SS Manuel D'utilisation

Masquer les pouces Voir aussi pour BRFD2230SS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating the product
5.25 Ice Tray
(in some models)
To get ice from the Ice Tray, fill the water tank
in the fridge compartment with water up to the
maximum level.
Ice cubes in the ice drawer may stick to each other
and become a bulk due to hot and humid air in
approximately 15 days. This is normal. If you cannot
break the bulk apart, you can empty the ice contai-
ner and again.
C
It is recommended to change the water
in the water tank if it remains in the wa-
ter tank for more then 2-3 weeks.
C
Strange noises you hear from the refrige-
rator at 120-minute intervals are the so-
unds of ice-making and pouring. This is
normal.
C
If you do not want to make ice, press the Ice
off icon to stop the icematic to save energy
and prolong the service life of your refrigerator.
C
It is normal that a few drops of water drop
from the dispenser after you have taken water.
5.26 Icematic and ice
storage container
(in some models)

Using the Icematic

Fill the Ice Tray with water and place it into its
seat. Your ice will be ready approximately in two
hours. Do not remove the Icematic from its seating
to take ice.
Turn the knobs on the ice reservoirs clockwise by
90 degrees.
Ice cubes in the reservoirs will fall down into the
ice storage container below.
You may take out the ice storage container and
serve the ice cubes.
If you wish, you may keep the ice cubes in the ice
storage container.
Ice storage container
Ice storage container is only intended for
accumulating the ice cubes. Do not put water in it.
Otherwise, it will break.
29 / 37 EN
Refrigerator / User Manual

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Brfd2230xss

Table des Matières