Publicité
8. Adjust the leg rest to the required height for the user by pulling the adjustment strap upwards until
the leg rest reaches the correct position, as indicated by the numbers on the outside of the tube.
9. Secure the upper frame to the lower frame, ensuring that the spring pin locks in place to
fix the upper and lower parts together.
10. Release the base plate brakes. The device is now ready for use.
USE
1. Ensure that the environment is safe for the transfer to take place. When satisfied, place the patient transfer assistant in front
of the service user.
2. Ensure that the service user's feet are placed on the base plate, using the foot markers as a guide. The legs should be in a
comfortable position, cushioned by the leg supports. To facilitate a comfortable position, adjust the height of the lower leg
supports so that the top is approximately two inches below the service user's knees.
3. Once you are sure that the patient transfer assistant is correctly positioned, lock both wheels by depressing a brake pedal.
Both wheels will lock regardless of which side you are walking on.
NB: The wheels must always be locked when the user stands up and sits down!
4. If the user needs help to stand up using the ladder belt or harness, place it safely around the user.
a. Place the ladder sling behind the user, with the non-slip material against the body and the lower edge resting on the seat
cushion.
b. If using the harness, place the lower section just below the user and the upper section against the lower back. Then secure
with the clasp.
Your method of applying a counterweight should be reviewed and approved as part of your risk assessment.
VERSION DECEMBRE 2024
13
Publicité
