Publicité
This fine pump that you have just purchased is designed from the latest in
material and workmanship.
Before installation and operation, we recommend the following procedures:
Check with your local electrical and plumbing codes to ensure you
A
comply with the regulations. These codes have been designed
with your safety in mind. Be sure you comply with them.
We recommend that a separate circuit have to be lead from the
B
home electrical distribution panel properly protected with a fuse
or a circuit breaker. We also recommend that a ground fault
circuit be used. Consult a licensed electrician for all wiring.
The ground terminal on the three prong plugs should
C
never be removed. They are supplied and designed
for your protection.
Never make adjustments to any electrical appliance or
D
product with the power connected. Do not only unscrew
the fuse or trip the breaker, remove the power plug
from the receptacle.
APPLICATION :
Designed for use to empty waterbeds,
aquariums, transfering and/or removing
water from roof tops, puddles, etc.
This utility pump is designed for a
portable application, for dewatering
around homes and farms.
CAPACITY :
5'
325 US GPH
20'
300 US GPH
40'
200 US GPH
2
FOR INFORMATION | TEL : 514.337.4415 | FAX : 514.337.4029
SAFETY INSTRUCTIONS :
Friction loss
in pipe not
included.
FEATURES :
Non-corrosive material.
Stainless steel mechanical rotary seal.
Thermal and overload protection.
1/12 HP, 115VAC, 60Hz.
NOTICE
This unit is not designed for
applications involving salt water or
brine. Use with salt water or brine
will void warranty.
Publicité
