Publicité
1. Installing batteries into the remote
Start by inserting two AAA 1.5V batteries into their appropriate compartment.
NB: The two AAA 1.5V batteries are not included.
To replace the batteries, open the battery
compartment and insert 2 new ones of the same
type.
The batteries may explode if they are not installed correctly.
Note: Use the remote control within 5 meters of the unit, and aim the unit at an angle
not exceeding 30°.
Notes:
1. Do not use rechargeable batteries.
2. If the remote will not be used for a long time, please take out the batteries and
store them in a dry and cool place.
3. Do not expose the remote to high temperature and humidity.
4. Never try to disassemble the remote.
5. Make sure to avoid reflections from mirrors or glass panels that could impair the
infrared signal of the remote.
IV – REMOTE CONTROL
Replace only with the same or equivalent type.
WARNING
36
Publicité
