Publicité
4 MAJOR OPERATION CONTROLS AND THEIR FUNCTIONS (CONT.)
4.1
C/CS Back Focus Adjustment Ring
This ring is used to adjust the back focal length or picture focus by rotating
this ring clockwise for the C-mount and counter-clockwise for the CS-mount
lens.
4.2
Back Focus Lock Screw
This screw is used to lock the back focus adjustment ring.
4.3
Auto Iris Connector
This 4-pin female connector supplies the power and either video signal or DC
control signal to the auto iris lens.
A 4-pin male connector, which can be mated with the camera's female
connector, is supplied as a standard accessory. This male connector can be
installed on any auto iris lens.
4.4
Mounting Bracket Hole
This threaded hole (1/4"-20) is used to mount the camera onto a mounting
bracket or tripod.
4.5
Function Switch
A. AGC (auto gain control) / (ON/OFF) / (Sw6)
This feature keeps signals at a constant level. This control is very useful while
using the camera at low light levels and when light levels change over time.
All manuals and user guides at all-guides.com
Switch Alignment
* Except A/I, AGC
10
Publicité
