Toro 51480A Mode D'emploi page 9

Starting the Trimmer
To start the trimmer, slide the lock switch back to the O
then squeeze the trigger (Figure
1. Lock switch
Stopping the Trimmer
To stop the trimmer, release the trigger.
All manuals and user guides at all-guides.com
N
7).
Figure 7
2. Trigger
Advancing the Line
Note:
position,
The trimmer is equipped with an auto-feed head.
1. With the trimmer running, release the switch trigger.
2. Wait 2 seconds, then press the switch trigger.
Note:
with each stop and start of the switch trimmer until the line
reaches the length of the grass deflector blade.
3. Resume trimming.
Advancing the Line
Manually
Disconnect the string trimmer from the power supply, then push
the red button at the base of the spool retainer while pulling on the
trimmer line to manually advance the line.
g015658
Trimming
7
The line extends approximately 6 mm (1/4 inch)
Figure 8
g021135