Toro 51480A Mode D'emploi page 7

2
Installing the Guard
Parts needed for this procedure:
1 Guard
1 Phillips screw
Procedure
1. Slide the guard onto the trimmer base as shown in
1. Phillips screw
2. Secure the guard using the Phillips screw.
All manuals and user guides at all-guides.com
Figure 2
2. Guard
3
Installing the Edge Guard
Parts needed for this procedure:
1 Edge guard
Procedure
Insert the ends of the edge guard into the holes in the trimmer
housing as shown in
Figure 2.
g015656
1. Edge guard
5
Figure 3.
Figure 3
g017621